Letter Project Part 2

Project 3(I): Using the red carpet as a background, create an I using Q-Tips. Place 8 Q-tips in a rectangle outlined shape as pattern dictates. 1 Q-tip for top and bottom, 3 for each side. Inside place a line of 6 Q-tips vertically with small spacing between each while making sure they align with the side Q-tips. Three lines of the 6 vertical Q-tips should be present when finished. take a picture using normal room lighting.
Project 4:(E): Using a yellow tiled floor, take shaving cream (preferably pink tinted) and create 3 long vertical lines close enough together they seem to form one thick vertical line. Create three more lines of similar thickness. There should be two long lines on top and one shorter in the middle. Use E pattern as a guide. Take picture in normal room lighting.
Project 5(S): Use red carpet as background. Using S pattern, create an S using a solid black scarf. Make sure the thickness of the S's curves resemble that of S pattern. Watch the spacing of inside curves of S as well. When it resembles S pattern closely, take a picture in normal lighting.
Project 6:(B): Use a yellow pillow with dark green stripes made of lines as a background. Fold a piece of Kleenex and in half and then in half again creating a thick line. Next, take another piece of Kleenex folded in half and place the B pattern on top where only the curves of the B cover Kleenex. Trace curves of the B(inside and out)(B<-) and cut. Then take another piece of Kleenex fold it in half and cut vertical stripes using the width of the folded kleenex as the length of the strip. Assemble pieces to match that of B pattern using the long folded Kleenex as the back of B (->B) and small strips as bridges between the back of B and the curves of the B. Make sure the inside shapes of B matches closely with the inside shapes of the pattern B.
Project 7(R): Red Carpet as background. Using 11 toilet paper rolls create an R using R pattern as a guide. There should be four rolls as the back of R (->R), three for the top of the R, Two for curve of the R, two for the leg brace of R(R<-) and one for the middle bridge. To make edges appear more linear and straight flatten one side of all the toilet paper rolls but the two used for the curve. Take picture in normal room lighting.
Project 8(G): Use yellow wooden counter top as a background. Assort 18 rocks of white, grey and a few black, in a G formation using pattern as a guide. Place light colored rocks on outer curve of G(->G), grey rocks on top and bottom part of curves and black rocks as the final edge of G(G<-) Place one black stone in center of outer curve of G(->G). Take picture in normal room lighting.
Project 9(M): use a red wash cloth as background. Put water into a paper cup and create a spout by pinching cup. Pour water into an M pattern onto cloth, using hands as bridge to create straight lines on wet part of cloth. Use fingers to rub wet part of cloth to clean up edges and even thickness of lines as best as possible. Take a picture in normal room lighting.
Project 10(N): Using a Plate with a yellow rim, tap ground coffee beans onto plate using N pattern as a guide. Use finger or utensil to straighten and clarify lines. Tap a small amount in a circle around the N close to the rim of plate. Take picture in normal room lighting.